You can assign a meaningful name for the management
consideration. But note that, this name will be the
“Identifier” for the Peer-to-Peer Printing (PTPP).
10. Click “Next” to configure network protocol in the
following screen.
In the system default, IPX and NetBEUI protocols are
enabled.
About the TCP/IP, you can either (1) assign a fixed IP
address for the print server or (2) configure it later by the
configuration utility.
11. Click “Next”, and the configuration summary is
displayed in the window. Now, you have completed the
“Print Server Setup”. By clicking “Next” , your system will
perform “Add network port” of the print server to your PC.
To Next Page
Loading...
