Edwards nEXT200200 - Page 67

▪ Controlled v
enng opons, including operang a fan from the controller
▪ Standby speed seng
▪ Normal speed seng
▪ Timer sengs: to enable and disable the mer, seng the meout period
▪ Electronic braking opons
▪ Factory default sengs
Refer to the TIC Turbo and Instrument Controller or TIC Turbo Controller Instrucon
Manuals for informaon on how to do the sengs.
Note:
Y
ou cannot congure the Analogue Output Opons using the TIC. You cannot assign a
mul ‑ drop address to the pump with TIC.
Opon is available to connect the TIC to a PC and using the TIC PC program to congure
the pump. The TIC PC program allows:
▪ conguraon of all sengs given in the above list
▪ conguraon of the analogue output opons
▪ assignment of a mul‑drop address.
Refer to the TIC PC program Instrucon Manual for more informaon.
Page 63
B85200880_D - Con
guraon