Edwards SCU-1600

SCU-1600 Control Unit for Turbomolecular Pump
March 10 4 Issue 1-a
1
INTRODUCTION
2. Safety instruction label
This label describes instructions before operating the SCU-1600.
Figure 2 - Safety instruction label
3. Caution label
This label describes precautions for operating the SCU-1600. Follow these precautions.
Figure 3 - Caution label
4. Connector caution label
This label describes lock of the connector.
The label instructs operators to prevent the connectors from being disconnected while the STP
pump is in operation.
Figure 4 - Connector caution label
5. Voltage rating label
This label describes the rated voltage of the SCU-1600. Use voltage specified in this label.
Figure 5 - Voltage rating label