Edwards SCU-1600

SCU-1600 Control Unit for Turbomolecular Pump
March 10 13 Issue 1-a
3
INSTALLATION
3 INSTALLATION
3.1 Unpacking
Check outer package for damage and that the delivery note corresponds to the purchase order.
Note: It is recommended to keep the packaging materials, such as the corrugated fibreboard
container and cushioning material for possible re-use. If the SCU-1600 is damaged, return it in
its original package and contact Edwards or their distributor.
3.2 Front panel
1 LCD panel 10 BRAKE LED
2 FAILURE LED 11 STOP switch
3 RESET switch 12 START switch
4 REMOTE LED 13 ACCEL. LED
5 UP switch 14 NORMAL LED
6 MANUAL/REMOTE changeover switch 15 STP-LINK X8
7 SELECT switch 16 TEMP CTRL LED
8 ENTER switch 17 POWER LED
9 DOWN switch
Figure 10 - SCU-1600 front panel
Note: Refer to Table 2 for front panel functions.
1
2
4
3
17
7
5
6
8
9
10
1213
14
16
15
X8 STP-LINK
11