Parameterisation
MSM-USM2G-BA-UK-001 Page 41 of 45
6.3 Main Menu Configuration
The main menu is structured into 7 submenus.
Fig. 6.22: Opened main menu „Configuration“
Accept Configuration
o Storage and adoption of the changed parameters for the currently selected device
locally in the Browser
Accept all 4 Configurations
o With this button the changed parameters of all devices (Master device and optionally
edified slave devices 1…3) stored and adopted locally in the Browser
Dismiss Configuration
o Dismissal of al changes done in the current session (since last storage with „Accept
Configuration“)
EES factory defaults
o Restoring of the default settings for all parameters
Identify device
o Reading / Identification of the device type from the connected annunciator
Read parameter from device
o Reading of the currently implemented parameter settings from the connected
annunciator
Write parameter to device
o Sending of the parameterisation from the Browser to the connected annunciator
7 Parameterisation by Excel-file
In many applications, a part of the required information for parameterisation is already available in
Excel-files (e.g. data point lists). In this case it is useful to transfer this information to a template and
import it into the annunciator. EES provides a template that can be filled in and processed with
common procedures. With the Excel file the parameters for the alarm channels, repeat relays and IEC
objects can be imported into the BSM.
All other parameters can then separately be adjusted on the Web-interface.
The file consists of three different tabs which allow for parameterisation of the following features:
EES_Input - Alarm channels and IEC objects
(IEC-objects for BSM only available in Slave-Mode)
EES_Relay - Repeat relays
EES_Collective - Logic disjunctions for 16 „collective alarms“ (Function not available for BSM-P)
The given structure of the Excel file must not be changed. This applies especially for the
designations in the first two rows. For a better overview, columns which are not required
can be deleted from the table. Empty columns will not be processed during the import.
To Next Page
Loading...