EES BSM - 6.2.3.2 Submenu Export;Import

Parameterisation
Page 30 of 45 MSM-BSM2G-BA-UK-001
6.2.3.2 Submenu Export/Import
On this page the configuration of the fault annunciator(s) can be stored or a parameter file can be
loaded. The following options are available:
Store complete parameterisation
The parameters of the whole annunciator system (incl. optionally connected slave devices in a
cascaded system) are packed to one file and saved. Depending on the settings of the internet browser
used, this file will be saved under the default name „EESsystem.pcf“ in the download folder, or the
filename and folder can be chosen individually.
Any changes done to the parameterisation on the web-interface have to be saved first by „Accept
configuration“ or „Accept all 4 configurations“, respectively, before they can be exported.
Load complete parameterisation
Import of a parameter file (e.g. EESsystem.pcf) from an arbitrary folder.
Store device parameterisation
Button „Store“
The parameter file of the chosen device (Master (0) or Slave 1…3) is stored as a packed file.
Depending on the settings of the internet browser used, this file will be saved under the default
name „USMDeviceX.pcf“ (X indicates the device number 0…3) in the download folder, or the
filename and folder can be chosen individually.
Any changes done to the parameterisation on the web-interface have to be saved first by
„Accept configuration“ before they can be exported.
Button „HTML export“
The parameters of the chosen device (Master (0) or Slave 1…3) are displayed in HTML format
in a separate window of the browser and can be printed, e.g. for documentation purposes.
Only parameters of devices, which have been edified in the sub-menu „New/adapt“ before, can be
exported.
Load device parameterisation
Import of a parameter file from an arbitrary folder into the chosen device.
Only parameters of devices, which have been defined in the sub-menu „New/adapt“ before, can be
imported.
Import Excel Parameterisation
In certain applications, parameters need to be imported from an Excel-file into the devices.  Please
refer to section 7 „Parameterisation by Excel-file“.