EasyManua.ls Logo

EKF SC3-LARGO - Utility Interfaces

Default Icon
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Guide • SC3-LARGO • CompactPCI
®
Serial CPU Board • Intel
®
Core
TM
5xxx Processor
Utility Interfaces
Besides the high speed mezzanine interface connectors P-HSE and P-PCIE, the SC3-LARGO is provided
with the utility interface expansion connector socket P-EXP. This connector comprises several
interfaces, which may be useful for system expansion on mezzanine cards, as an option:
< HD Audio
< LPC (Low Pin Count)
< SMBus
< 2 x USB
The SMBus is controlled by the QM87 platform controller hub. The SMBus signal lines on the P-EXP
utility expansion connector can be switched on/off under software control (PCH GPIO) in order to
isolate external components in case of an I
2
C address conflict.
The HD Audio port requires an additional audio codec, as provided e.g. on the PCS-BALLET side card.
The LPC bus presents an easy way to add legacy interfaces to the system. EKF offers a variety of
mezzanine expansion boards (side cards), to be attached on top of the SC3-LARGO, featuring all
classic Super-I/O functionality, for example the PCS-BALLET. Access to the connectors PS/2 (mouse,
keyboard), COM, USB and audio in/out is given directly from the front panel.
© EKF -29- ekf.com

Table of Contents