Need help?Do you have a question about the EKF SC3-LARGO and is the answer not in the manual?
Records changes and revisions made to the user manual over time.
Comprehensive list of general, processor, firmware, and memory specifications.
Details Passmark performance test results for different configurations.
Describes integrated graphics engine, display capabilities, and supported resolutions.
Outlines networking interfaces, speeds, and protocols.
Lists primary chipset (QM87) and its integrated features and I/O.
Details key on-board components like Ethernet controllers, PCIe switch, and RAID controller.
Covers security features like Trusted Platform Module and AES acceleration.
Lists connectors and I/O available on the 4HP front panel.
Details backplane connectivity and resources provided by the SC3-LARGO.
Describes mezzanine expansion options and storage capabilities.
Lists environmental operating conditions and regulatory compliance.
Outlines supported Real-Time Operating Systems and driver packages.
Details the purpose and connectivity of specific pin headers on the board.
Explains the function and configuration of various jumpers on the board.
Explains the function and status indications of the Power Good LED.
Describes the programmable General Purpose LED and its status signals.
Details the Hard Disk Activity LED, indicating SATA port activity.
Explains the Ethernet Backplane LED for monitoring network link status and activity.
Describes the SC3-LARGO's role as a CompactPCI® Serial system slot controller.
Provides essential warnings and cautions before proceeding with installation or replacement.
Details the step-by-step procedure for installing the SC3-LARGO board.
Outlines the procedure for safely removing the SC3-LARGO board from its slot.
Provides guidelines for ensuring Electromagnetic Compatibility (EMC) compliance.
Explains how to replace the board's battery, with warnings.
Lists on-board PCI devices and their configuration space locations.
Maps PCIe switch ports and lanes to backplane slots.
Lists devices connected via the System Management Bus (SMBus).
Details the hardware monitor for temperature and voltage measurements.
Describes registers for board control, status, and watchdog features.
Explains the bits for board control and watchdog configuration.
Details status bits related to power failures and voltage regulators.
Lists status bits for watchdog events and power failures.
Describes the register for reading the PLD revision.
Lists the usage of General Purpose Input/Output pins on the QM87 PCH.
Explains configuration jumpers for PCI Express settings.
Details the J-GP jumper for BIOS reset and PPS signal.
Explains the J-MFG jumper for entering manufacturer mode.
Describes the J-RTC jumper for resetting the Real-Time Clock.
Illustrates and describes the connectors available on the front panel.
Shows different front panel configurations for 8HP assemblies.
Displays various front panel configurations for 12HP assemblies.
Details the Mini DisplayPort connectors and pin assignments.
Explains options for securing mDP cable connectors.
Describes the optional VGA connector and its pinout.
Details the USB 3.0 connectors and their pin assignments.
Explains the Gigabit Ethernet connectors and their pinouts.
Introduces mezzanine connectors for expansion.
Details the P-EXP connector, its pins, and supported interfaces.
Describes the P-HSE connector and its high-speed interface assignments.
Details the P-PCIE connector for PCI Express expansion.
Explains the P-DP3 header for a third DisplayPort output.
Covers pin headers for debugging and front panel handle switches.
Describes the P-ISP header for PLD programming.
Details the P-XDP header for processor debugging.
Provides pin mapping for CompactPCI® Serial backplane connectors P1-P6.
Lists known issues with the SC3-LARGO and their status.
General| Category | Computer Hardware |
|---|---|
| Type | Mini PC |
| Battery | Not applicable |
| Drive Bays | 1 x 2.5" HDD/SSD |
| RAM | Up to 8GB |
| Operating System | Windows/Linux |
| Graphics | Intel HD Graphics |
| Ports | USB 2.0, USB 3.0, HDMI, VGA, Ethernet, Audio |
To Next Page