ELCA E1 Series - Symbols; Who These Instructions Are for

Use and Maintenance Manual
ELCA
10
- Maintenance technician: the entity, specialised technician, that
carries out routine and extraordinary maintenance on the Elca
Radio Remote Control, in order to keep it undamaged and running
efciently.
- Manual or Instruction manual: document consisting of Part 1
(Transmitting unit and its charging system), Part 2 (Receiving unit),
Position of the controls and the Connection diagram.
- Person: individual, natural or legal person and/or every entity,
however considered.
- Owner: the owner of the Radio Remote Control.
The functions indicated for the Manufacturer, the Installer, the User
and the Maintenance Technician can be carried out by a single entity,
where these have the skills and assume the relative responsibilities.
Each entity should be aware of the instructions in the Manual for the
work that it carries out.
For example, if a Manufacturer also acts as an Installer, and/or
Maintenance Specialist, it should understand and follow also the
instructions specically directed at these entities. The same criteria
should be applied in the case where, for example, a User assumes the
function of manufacturer and/or Installer.
1.3 Symbols
The parts of the Manual that are drawn attention to by this
symbol should be read very carefully.
The parts of the Manual that are drawn attention to
by this symbol contain warnings, information and/or
instructions that are extremely important for safety
issues: failure to understand these parts could be
dangerous for Persons and/or property.
1.4 Who these instructions are for
The Instruction Manual is for the User, the Owner of the Radio Remote
Control, the Installers, the Manufacturers and all those Persons who,
for whatever reason, are operating the Radio Remote Control or the
Machine on which it is installed.
The Manual should be read, understood and applied, in all its parts, by:
- the Owner and/or the person responsible for operating the Machine
and/or the Elca Radio Remote Control;
- the Manufacturer of the Machine who decides to equip it with a
Radio Remote Control;
- the Installer of the Radio Remote Control or the entity that takes
care of its tting on a Machine, on a device, on a system, etc., and/
or that has the responsibility for its operation;
- the safety manager of the workplace where the Radio Remote
Control is used;
- the Users, namely those who materially, and for any purpose, are
enabled/authorised/entrusted with using the Radio Remote Control
or simply nd themselves in this situation;