ELCA E1 Series - Special Maintenance

Maintenance
ELCA
44
13.2.2 Monthly routine maintenance
At least once a month:
- clean the Transmitting Unit with a damp cloth and make sure it is
undamaged.
- clean the battery contacts and the unit's power contacts;
- clean the contacts of the charging system's power supply.
- check that the symbols on the Transmitting Unit panel are
undamaged. They should be clearly visible.
13.2.3 Quarterly routine maintenance
At least every three months:
- check that the commands sent and movements carried out by the
Machine correspond;
- check that when no movement command is sent the contact of the
SAFETY relay is open. After carrying out the maintenance the work
must be recorded (date, signature, comments) as evidence that
the control was duly carried out. Keep the record together with the
other installation documents, since it is an important maintenance
intervention concerning safety.
13.3 Special maintenance
By special maintenance is meant the operation and the entirety of repair
operations that have to be carried out following breakages, faults or
malfunctions of the Radio Remote Control.
Special maintenance beings the Radio Remote Control back to its original
conditions of use and operation.
Special maintenance should only be carried out by a
qualied Elca person.
The qualied Elca person is a specialised technician who
has the specic skills and competences with regard to
the Radio Remote Control.
No specialised technician can carry out special
maintenance operations on the Radio Remote Control
if he does not belong to the Elca assistance network or
who is not expressly authorised by Elca.
For the special maintenance operations only original
Elca parts and materials should be used.
The instructions and maintenance Manual should be
available for the specialised technician entrusted with
the special maintenance operations.
When requesting assistance and/or spare parts from Elca, you must
provide the serial number of the Radio Remote Control, the date of
purchase, and the problem encountered.
To enable the request to be met it is also helpful to know the address
of the place where the Radio Remote Control is used, the name and
telephone number of the person to contact, as well as the company
supplying the Radio Remote Control.