EasyManua.ls Logo

ELCA E1 Series - Charging Indicator Lights; Connecting the Charging System

Default Icon
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Charging system of the Transmitting Unit
ELCA
40
12.2 Charging indicator lights
A
3
4
Below are the blue light signals regarding the Charge LED [A] of the
Transmitting Unit when charging:
SIGNAL MEANING
blue LED on. The Transmitting Unit is charging.
blue LED off.
The Transmitting Unit is charged or
else it cannot be carried out because
the temperature is outside the
permitted range.
The full charging process lasts about 4 hours.
The lithium polymer batteries allow a rapid charging process in the
initial part of charging.
Two hours charging provides 75% of a full charge, the equivalent of
about 15 hours run time, while a charge of just 20 minutes provides
about 2 hours of run time.
It is advisable to always keep the batteries fully charged to be able to
ensure full effectiveness.
Avoid leaving the batteries discharged for long periods.
Charge the batteries at least once a year.
12.3 Connecting the charging system
Check that the electrical connection poles are clean and dry before
connecting the charging system.
CLICK

Table of Contents

Related product manuals