Decommissioning and disposal
ELCA
48
SIGNAL POSSIBLE CAUSE SUGGESTED REMEDY
The external antenna
(if present) is not
working.
Check that position
and the connection of
the external antenna
are correct.
The system has
not been installed
correctly.
Check the system
has been installed
correctly (Receiving
Unit position, metal
obstacles, etc.).
One or more
commands do
not activate the
corresponding
movement.
A fuse is damaged.
Check the condition
of the fuses inside the
Receiving Unit.
The command was not
transmitted.
On the Receiving Unit
check that the LED
comes on of the relay
corresponding to the
command activated on
the Transmitting Unit.
The wiring is incorrect.
Check the wiring in the
Receiving Unit
15 Decommissioning and disposal
15.1 Decommissioning
After its decommissioning the Radio Remote Control should be
transported and kept in accordance to what is in paragraph 8.5.
15.2 Disposal
If disposing of all the parts of the Transmitting Unit and its charging
system, they all should be treated as separated waste. Disposal should
comply with the legal provisions and regulations in force in the country
of use.
To Next Page
Loading...
