ELCA E1 Series - 2 Series, Radio Remote Control and Unit; 3 Conformity; CE Conformity; Countries of Use

Series, Radio Remote Control and Unit
ELCA
12
2 Series, Radio Remote Control and Unit
The Manual concerns the Transmitting Unit of an Elca Radio Remote
Control in the E1 series.
Elca Radio Remote Controls provide a control interface to e used on
Machines to manage the command and control system.
The Radio Remote Controls have been designed to be used at a suitable
distance and position.
A Transmitting Unit and a Receiving Unit make up the Radio Remote
Control of the E1 series.
3 Conformity
It is the responsibility of the recipients of these instructions to:
- check the radio frequency band permitted in the country where it
will be used;
- check that the Radio Remote Control operates inside this band;
- check the country's applicable standards;
- check that the Radio Remote Control operates correctly in conformity
with them.
In no way can the conformity of the Radio Remote Control be modied,
making changes to it or carrying out technical interventions that change
the way it works.
For the instructions and use of the Elca Radio Remote Controls, local
regulations must be respected.
These regulations obligate the protection of the conformity of the
products with local regulations, and the specic standards regarding
the safe use of the Radio Remote Controls or electric devices, both
inside and outside the workplace.
3.1 CE conformity
One of the indispensable requisites for the Radio Remote Control have
CE conformity is that it operates at one of the permitted frequencies,
based on existing provisions in the European Union.
The Radio Remote Controls in the E1 series operate in the 434,050-
434,790MHz frequency band, therefore they are in conformity with
Directive 2014/53/UE (RED) and its essential requirements.
Admission to the Radio Remote Control market is permitted since it
conforms to harmonised rules in the EU declaration of conformity in
force and applicable at the time this manual was printed.
The EU declaration of conformity of the Elca the Radio Remote Control
is provided enclosed with the Radio Remote Control itself.
3.2 Countries of use
The Radio Remote Controls in the E1 range, which operate in the
434,050-434,790MHz frequency band, can be used within the EU
(European Union) and EFTA (European Free Trade Association).