Safety warnings
ELCA
16
IN THE SAME WAY ELCA IS NOT RESPONSIBLE FOR, AND
DOES NOT ACCEPT ANY LIABILITY FOR, THE ASSESSMENT
OF THE RISKS TO BE CARRIED OUT WHENEVER TAKING
INTO ACCOUNT THE RADIO REMOTE CONTROL IN
GENERAL, OR SPECIFICALLY THE ELCA RADIO REMOTE
CONTROL, NOR FOR THE SUITABILITY OF OPERATING
THE MACHINE WITH A RADIO REMOTE CONTROL IN
GENERAL OR SPECIFICALLY THE ELCA RADIO REMOTE
CONTROL, IN RELATION TO THE STRUCTURE WHERE
THE MACHINE IS OR WILL BE USED, AS WELL AS THE
ENVIRONMENTAL AND/OR OPERATING CONDITIONS IN
WHICH THE MACHINE IS OR WILL BE USED.
Without limiting what was stated above, Elca is not responsible for, and
does not accept any liability for:
- defective installation or installation not complying with this Manual,
with any other instructions provided by Elca, and with all applicable
Laws, Regulations and Standards, also local;
- installation carried out on Machines, appliances, devices, equipment
and/or systems for which the use of a Radio Remote Control is not
permitted by its Manufacturer or by applicable Laws, Regulations and
Standards, also local, and for which the installation and/or use of a
Radio Remote Control could cause safety issues or other hazardous
situations that are not adequately eliminated and/or reduced, in
respect of applicable Laws, Regulations and Standards, also local;
- damage and/or deterioration of any part or function of the Radio
Remote Control;
- the use of the Elca Radio Remote Control that does not comply with
what is written in this Manual and in any other instructions supplied
by Elca and with applicable Laws, Regulations and Standards, also
local;
- the use of the Radio Remote Control in locations, climatic and/or
weather conditions that are not permitted or not recommended by
applicable Laws, Regulations and Standards, also local, forbidden
by the instructions in this Manual, or in relation to which there are
risks of damage and/or incorrect operation of the Radio Remote
Control (for example: temperatures outside the limits indicated in
the paragraph 9.3, situations with a risk of explosion, contact with
liquids or uids);
- the use of the Radio Remote Control in work conditions that do not
allow the User to maintain complete and continuous visual control
of the movements of the Machine and the load, if present;
- the use of the Radio Remote Control in a manner different to, or for
uses other than those permitted and/or not in complete conformity
with the instructions for use and maintenance contained in this
Manual;
- the lack of, or poor maintenance of the Radio Remote Control, both
routine and special, or the failure to repair any damage, wear or
malfunction of the Elca Radio Remote Control;
- failure to take the Elca Radio Remote Control out of service in the
case it or one of its components develops a fault or malfunctions;
- the use of non-original parts or components that were not supplied
by Elca;
- technical assistance for the Elca Radio Remote Control carried out
by a company other than Elca or that is not part of its assistance
network.
To Next Page
Loading...
