EWM1000plus EWM2000evo EWM3000new
QUICK GUIDE AND APPLIANCES LIST 25/176 599 72 40-80
10
Reading/cancelling last alarm Alarm code
11, 12 ...24
All LEDs light in sequence. Pressing a button the corresponding LED lights (and the Buzzer
sounds, if featured)
(*)In most cases, this time is sufficient to check the heating. However, the time can be increased by
repeating the phase without draining the water: for a moment to a different phase of the diagnostics cycle
and then back to the heating control phase (if the temperature is higher than 80°C, heating does not take
place).
(**) See tables of following pages.
(1) Models with Display.
To Next Page
Loading...
