EWM1000plus EWM2000evo EWM3000new
QUICK GUIDE AND APPLIANCES LIST 40/176 599 72 40-80
2.16 Burning on the circuit board EWM1000plus
In case of burning on the main circuit board, check that the problem is not caused by another electrical component (short-circuits, poor insulation, water leakage). Refer
to the figures below in order to identify the component that might have caused the burning according to the position of the burned area.
The circuit board shown below is the version with the greatest number of components: other boards may not feature all these components.
1. Power supply
2. Heating element
3. Door lock pilot lamp
4. Motor
5. Drain pump
6. Door safety interlock
7. Water fill solenoids
8. Washing NTC temperature sensor
9. Tachometric generator (motor)
10. Drum positioning DSP (top-loader)
11. Mechanical pressure switch
12. User interface communication
To Next Page
Loading...
