44
➌-3 ABOUT NETWORK FUNCTION (FOR PX-30E ONLY)
By configuring the network settings after connecting the PX-30E to a network device with the LAN
cable, you can transmit the setting command from the network device via the network to control
the PX-30E.
For details on the setting commands, visit the Elmo official website or contact the dealer
from whom you have purchased this product or our branch/office near your location.
https://www.elmousa.com https://www.elmoeurope.com
➌-4 FIRMWARE UPDATE PROCEDURE
The firmware of the PX-10E/30E will be updated from time to time. By updating the firmware, you
will be able to use new functions.
Prepare the firmware and update it according to the instructions below.
For details on the latest firmware, visit the Elmo official website or contact the dealer
from whom you have purchased this product or our branch/office near your location.
※Check the firmware version of the PX-10E/30E before starting the firmware update. There is no
need to update the firmware if the firmware of the PX-10E/30E is the latest version （⇒P. 31）
●Items required for the firmware update
・PX-10E/30E
・The latest firmware
・SD card (to save the firmware)
＜Update Procedure＞
1. Insert the SD card which contains the copied the firmware for update file into the SD card slot of
the PX-10E/30E. (⇒P.15)
2.While pressing the AF button [ ] and Power button [ ] on the operating panel
together, connect the AC power cord to the PX-10E/30E (Make sure to connect the AC adapter
to the wall outlet in advance.)
3. The firmware update starts. (The Power LED flashes green during the update.)
4. Verify that the Power LED flashes blue.
5. Connect the AC power cord and turn on the PX-10E/30E.
6. Initialize the PX-10E/30E. Press the Settings button [ ] on the operating panel and select
“Formatting” in the System Setting menu. (⇒P.29)
The firmware update will be completed when the initialization process is completed.
※The update will be performed automatically regardless of the version of the PX-10E/30E.
※Check whether the firmware has been successfully updated to the latest version by going to
“Product Version”. （⇒P.31）
To Next Page
Loading...
