Elmo PX-10E - Details about Functions

32
◆DETAILS ABOUT FUNCTIONS
FREEZE
To pause the camera image.
Press the Freeze button [ ] on the operating panel or [ ] on the remote control to pause the
image.
You can set whether to freeze the image on the LCD touchscreen when Freeze function is activated
from the System Setting. (⇒ [Move/Freeze] : P.29)
IMAGE ROTATION
To rotate the camera image.
Press the Image rotation button [ ] on the operating panel or [ ] on the remote control to
rotate the image.（⇒P.13、P.17）
You can set the angle of image rotation from the System Setting. ［90°／180°］（⇒P.29）
MASK
To mask a part of the image.
How to use MASK
Press the Settings button [ ] on the operating panel while the camera image or a playback
image is displayed on the monitor. Select “Image mask” from the “Image Quality Setting”. （⇒
P.30）
By pressing “Image mask”, you can setup the mask tool on the LCD touchscreen.
Select the area to be masked by dragging on the screen with your finger. (The color of the mask is
blue.)
Tap [ ] to apply. (The color of the mask is black.)
The number of mask that can be applied to the image is one. When [ ] is tapped after creating a
new mask, a previously created mask disappears.
Tap [ ] to remove the applied mask.
RETURN
To return to the previous screen.
APPLY
To output the contents of the LCD
touchscreen to the connected device.
DELETE
To remove the created mask.
お知らせ
・
The mask function is available only when the “Camera image” is selected in the Select image
menu.
・It is not possible to record the image with a mask.
・
The mask does not follow the change of the lens (zoom in/ zoom out, lens direction). It is
advisable not to use the mask function for the purpose of hiding confidential information.
NOTE