12
CHAPTER 2 —
INSTALLATION
In this Chapter you will find the information and instructions
that the Installation Technician needs to mount and connect the
ELNet LT
Energy & Power Powermeter
• During operation, hazardous voltages are
present in connecting cables and terminal
blocks.
• Fully qualified personnel must do all work.
Failure to follow this rule may result in
serious or even fatal injury to personnel
and/or damage to equipment.
• Refer to Section 1.3 Safety information
before carrying out any installation.
• Read this manual thoroughly and make sure
you understand the contents before
connecting the ELNet LT
Energy &
Powermeter to any power source.
WARNING!
To Next Page
Loading...