62
4 Select the T.O.U (time of use) schedule.
5.6.4 — Periodic Energy meter
This meter will display the total energy that was measured and
accumulated between two dates which can be defined by the user.
By using the sub menu you will be able to:
By using “F1” (DATE) the user can define two dates in order to set the
period of time for calculating the active energy in this period:
By Using “F2” The ELNet will display the amount of the active energy
used for each rate:
RT1 = Rate number 1
RT2 = Rate number 2
RT3 = Rate number 3
ALL= All rates
By Using “F3” and “F4” The ELNet will display the amount of active
energy, from the selected dates:
MON+ = Change the date by adding a month.
MON– = Change the date by subtracting a month
.
To Next Page
Loading...