59
5.6.1 — Main Energy Meter
This meter will display the total energy that was measured and accumulated in
the meter from the moment the meter was connected to the power. This meter
is non erasable and the total energy that was measured and accumulated
cannot be changed or deleted.
By using the sub menu you will be able to:
By using “F1” The ELNet will display the amount of the energy used for
each rate:
RT1 = Rate number 1
RT2 = Rate number 2
RT3 = Rate number 3
ALL= All rates
By using “F2” The ELNet will display the amount of the energy used for
each line:
L1 = Line number 1
L2 = Line number 2
L3 = Line number 3
ALL= All Lines
By using “F3” The ELNet will display the amount of the active, reactive and
apparent energy:
P = only active energy
Q = only reactive energy
P = only Apparent energy
By using “F4” The ELNet will display the amount of the imported energy
and the amount of the exported energy:
EXP = energy exported
IMP= energy imported
To Next Page
Loading...