ELNet LT - 4.0 - Entering code

36
4.0 — Entering code
The most important setting necessary for the proper
functioning of the ELNet LT Energy &
Powermeter is the Current Transformer setting.
The cross section of the leads to the current Transformer
must be compatible to the power of the current
transformer. We recommend a power transformer with at
least 3VA and the length of the wiring of the transformer
no longer than 3m.
1 From Main Menu scroll to Technical Menu.
2 Click “ENTER”.
The Enter Code screen appears
Figure 4.1 Enter Password
The password is 1.