9.4 How to install the drivers on Windows XP 54
9.5 How to install the parameter loader 56
9.6 How to start the parameter loader 58
9.7 How to connect the docking cradle 58
9.8 How to configure the COM port 59
9.9 How to load the parameter settings 61
9.10 How to view the download counter 62
9.11 How to view the version of the parameter programming tool
(dongle)
62
9.12 Display codes for parameter downloads 63
10 Parameter reference 64
10.1 Parameters by function 64
10.2 Parameters by owners 65
10.3 Temperature setting rules 65
10.4 Alarm delay (Ad) 66
10.5 Activity frequency (AF) 66
10.6 Marketing mode (Ar) 67
10.7 Buzzer enable (b0) 68
10.8 Buzzer duration (b1) 68
10.9 Calibration 1 (CA1) 69
10.10 Celcius or Farenheit (CF) 69
10.11 Refrigeration system failure (Ct) 70
10.12 Display stability (d2) 70
10.13 Defrost duration (dd) 71
10.14 Defrost interval (dE) 71
10.15 Differential (dIF) 72
10.16 Display (dIS) 72
10.17 Delay to saving (dS) 73
10.18 Defrost termination temperature (dtd) 73
10.19 Frezz-up protection (dtt) 74
10.20 Fan cycle off (FCF) 74
10.21 Fan cycle on (FCO) 75
To Next Page
Loading...
Need help?
General
