Elstat ems25+ - Learning Period (LP) Parameter

77
www.elstat.io
10.25 light delay (Ld)
The table below details the lights delay (Ld) parameter
DISPLAY
DESCRIPTION
Defines the delay to switch off the cooler lights after the ems controller switches to the
saving mode
CONSIDERATOINS Must be set in multiples of 30
RANGE 0 to 120 minutes
GLOBAL DEFAULT 00 (no delay)
10.26 learning period (LP)
The table below details the learning period (LP) parameter
DISPLAY
DESCRIPTION Defines whether the ems controller uses a 1-day or a 7-day learning period.
CONSIDERATOINS None
RANGE 00 (1 day) or 01 (7 days)
GLOBAL DEFAULT 00 (1 day)