www.elstat.io
48
8.5 How to troubleshoot motion sensor alarms
The motion detection LED flashes to indicate that movement has been detected. However, a motion sensor LED
flashing continuously may indicate that the motion sensor is faulty or, if a motion sensor is not fitted, that the
parameter settings are incorrect.
For information about the motion sensor enable (Sn) parameter, see ”motion sensor enable (Sn)”
Follow the chart below to troubleshoot problems with the motion sensor.
Note
The ems controller stays in the ready mode if the motion detection LED is flashing
continuously.
To Next Page
Loading...
Need help?
General
