BA-en-3041-2008_PC 69
60 Yes Short circuit
high voltage
charging
• Clean the bar.
• Check the mounting position.
• Reduce the setpoint value.
• Clear the error.
• If this error occurs again, send in the device
for repairs.
61 Yes Power
High voltage
Discharge
• Clean the bar.
• Check the mounting position.
• Reduce the setpoint value.
• Clear the error.
• If this error occurs again, send in the device
for repairs.
62 Yes Discharging bar 1
• Check the connection of the bar.
• Check the settings.
• Clear the error.
• If this error occurs again, send in the device
for repairs.
63 Yes Discharging bar 2
• Check the connection of the bar.
• Check the settings.
• Clear the error.
• If this error occurs again, send in the device
for repairs.
73 Yes General error
ethernet modul
• Check the bus line.
• Check the communication with the control.
• Clear the error.
• If this error occurs again, send in the device
for repairs.
74 Yes Communication error
ethernet modul
• Check the bus line.
• Check the communication with the control.
• Clear the error.
• If this error occurs again, send in the device
for repairs.
76 Yes Invlid
operating mode
ethernet modul
• Check the bus line
• Check the communication with the control.
• Clear the error.
• If this error occurs again, send in the device
for repairs.
Error
number
Error
clearable
Cause Measure