ELTRA ELEMENTRAC CS-i User Manual

Safety
10
2.3 Repairs
This Manual does not contain any repair instructions. For reasons of safety, repairs may only
be carried out by Eltra GmbH, by an authorised agency, or by qualified service technicians.
Please notify the following in the event of a repair …
…the agent representing Eltra GmbH in your country;
…your supplier; or
…Eltra GmbH directly.
Service address :
Eltra GmbH
Retsch-Allee 1-5
42781 Haan
Germany
+49 2104 2333-444
service@eltra.com
www.eltra.com
2.4 Intended use
The ELEMENTRAC CS-i has been developed for the analysis of carbon and sulphur in various
materials. The induction furnace permits the analysis of typically inorganic materials such as
metals, alloys, ceramics and cement.
2.5 Improper use
Use is prohibited in the private domain and for purposes other than those set out in the
“Intended use” chapter. Repairs and modifications may only be carried out by Eltra GmbH, by
an authorized agency, or by qualified service technicians.

ELTRA ELEMENTRAC CS-i Specifications

General

Brand	ELTRA
Model	ELEMENTRAC CS-i
Category	Measuring Instruments
Language	English