ELTRA ELEMENTRAC CS-i - Product Description; Front View Components

Description
18
3 Description
The ELEMENTRAC CS-i is a combustion analyzer. The machine determines the concentration
of carbon and sulphur in inorganic and organic samples through the combustion in the induction
furnace or resistance furnace. The gaseous products of combustion CO
2
and SO
2
are
measured by infrared measurement cells.
3.1 Front
The following figure shows the front of the machine:
Fig. 2: Front of the ELEMENTRAC CS-i
Position
Component
Description
1
Analyzer
Analyzer with induction furnace
2
Crucible holder
Holder for ceramic crucibles with sample material
and furnace opening
3
Main switch on the analyzer
Switches the analyzer on and off
4
Analyzer door
Behind the machine door are the paper filter, dust
box, carrier gas preliminary cleaning, particle filter
and moisture filter
5
Feet
The inner feet secure the tether (supplied for
transport).
1
4
2
3
5