Risk to life caused by an electric shock
Uninsulated part of the sample insertion tool
− The metal part of the sample insertion tool is not insulated. Contact with
the metal part of the sample insertion tool when inserting it into the
furnace can result in an electric shock and cause serious or life-
threatening injuries.
• Never grasp the sample insertion tool by the metal part when
inserting the tool into the furnace.
• Only ever grasp the sample insertion tool by the plastic handle when
inserting it into the furnace.
Risk of injury
Dangerous chemicals
− Dangerous chemicals can cause fatal poisoning or serious chemical burns
to the skin when working on the machine.
• Comply with the safety data sheet for the substances used.
• Wear personal protective equipment.
• Never eat or drink near chemicals.
Chemical burns to skin, eyes and mucous membranes
Caustic substances
− Acids can cause chemical burns to skin, eyes and mucous membranes.
• Comply with the safety data sheet for the acids used.
• Always wear suitable work clothing including protective gloves and
eyewear.
To Next Page
Loading...
Need help?
General
