49
Configuration methods for functions assigned to buttons , ,
The lock, self-start and stair light buttons can be used with their “Default configuration” or can be “reconfigured”
from the Default setting. In the former instance they are used to send a lock opening command, self-start and
send a stair light activation command.
In the latter instance the functions can be modified using the “listbox” in the “Buttons menu” (highlighted in the
figure 78).
Table 2 lists the functions and a description of the "reconfigured" setting in relation to the default.
Fig. 78
Confi guration of the video door entry unit
To Next Page
Loading...
