AIRPLANE
FLIGHT
SUPPLEMENT 4
PRIMUS EPIC - FLIGHT
MANAGEMENT SYSTEM
ANAC APPROVED S4-10
REVISION 15 code 01 Page 1
Copyright © by Embraer. Refer to cover page for details.
NORMAL PROCEDURES
(LOAD PRIOR TO 27.1)
NOTE: All pages from code 01 of this supplement are applicable to
airplanes equipped with Load prior to 27.1.
The FMS normal operating procedures are contained in the Honeywell
Flight Management System Pilot's Operating Manual.
The airplane normal operating procedures are the same as those in
the basic AFM except as follows:
PRIOR TO FLIGHT
FMS Position................................................................. INITIALIZE
Flight Plan..................................................................... ACTIVATE
Performance INIT ......................................................... SET/CONFIRM
INIT
After a RTO, the performance INIT must be reconfirmed.
Takeoff Pages............................................................... SET/CONFIRM
For airplanes Pre-Mod. SB 170-31-0028 (prior to LOAD 21.2):
Fuel Used................................................................ RESET
If RNP AR operations are intended:
RNP predictive performance capability ................... CHECK
PFD NAV Source.......................................................... SELECT FMS
For airplanes Post-Mod. SB 170-31-0028 (LOAD 21.2 and on) or with
an
equivalent modification factory incorporated:
Speed Selector Knob............................................... AS REQUIRED
LNAV............................................................................. SELECT
VNAV ............................................................................ SELECT