AIRPLANE
FLIGHT
SUPPLEMENT 5
CAT II
OPERATION
ANAC APPROVED S5-10
REVISION 15 code 01 Page 7
Copyright © by Embraer. Refer to cover page for details.
PERFORMANCE
The performance data required for CAT II operations are presented by
basic CAFM output tables and must be calculated previously.
Operational regulations may require additional CAFM landing distance
adjustment.
ENGINES
TLA FLAPS
GEAR AIRSPEED
APPROACH
CLIMB
1 TO/GA 2 UP
APPROACH
CLIMB
SPEED
LANDING
CLIMB
2 TO/GA 5 DOWN
V
REF 5
(1)
LANDING
2 IDLE 5 DOWN
V
REF 5
(1)
NOTE: 1) The Landing Reference Speed (V
REF5
)
for CAT II operations
is the appropriate speed obtained from the CAFM and differs
from the V
REF5
used during the Category I operations.
DEMONSTRATED WIND COMPONENTS
Headwind...................................................................... 25 kt
Tailwind......................................................................... 10 kt
Crosswind ..................................................................... 12 kt
These demonstrated values are not considered to be limiting.
To Next Page
Loading...
