GENERAL
AIRPLANE
F
LIGHT
1-00
Page 4 code 01 REVISION 15
Copyright © by Embraer. Refer to cover page for details.
CHANGE MARKINGS
Changes to the text are indicated by a vertical line on the outer margin
of the page at the height of affected lines.
A vertical line, adjacent to the page number, indicates either the
following changes:
• relocated text or illustrations,
• entire new supplement, or section, or block.
Change markings are only applied to changes included at the time of
approval.
LISTS OF EFFECTIVE PAGES
A List of Effective Pages and a TR List of Effective Pages, at the
b
eginning of this Manual, present the revision status of each page of
this Manual. Their purpose is to allow verification of Manual updating.
CONFIGURATION RELEASE
Customer AFM is an extract of Authority-approved AFM, customized
for specific fleet configuration, identified by three last numbers after
manual Part Number.
Configuration Release is a change on Customer AFM contents due to
modifications on airplane optional equipment or operation.
Configuration Release will be identified on manual cover and on the
List of Effective Pages by an alphanumeric character composed by the
latest revision number followed by a dash and an alphabetic letter.
Example: Release 12-A, Release 14.3-A...
The sequential letter is reinitiated on every next Revision for each
Customer AFM.
Both cover and LEP (of normal and temporary revision) must be
replaced with those transmitted by the configuration release, and the
content pages inserted or removed accordingly.
To Next Page
Loading...
