EasyManuals Logo

EMC2 VNX Series Installation Guide

EMC2 VNX Series
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Site requirements
Table 1 Resource Requirements
Resource Requirement
Power AC Power: For high availability, at least two 200-240 V AC circuits are required.
For full power specifications, go to https://mydocs.emc.com/VNX and select View
technical specifications under the About VNX section.
Network Two 1-Gigabit Ethernet management connections and two customer-supplied CAT5e
or better cables.
Space Cabinet vertical space:
l
4U for the storage processor enclosure (SPE)
l
2U for each standby power supply (SPS)
l
2U, 3U, or 4U for DAE 0, depending on DAE type
l
For each optional DAE, 2U, 3U, or 4U
Tools Slotted or Phillips screwdriver
Management Station A Windows-based computer to run the initialization, maintenance, and management
tools with:
l
Minimum screen resolution of 1280 x 800 and 256 colors
l
At least 500 MB free space
l
Connection on same LAN subnet as your system if you will use it to initialize the
system
l
Windows Domain Controller recommended
l
SMTP server network connection to the system and the management host
l
JRE (Supported versions are listed in the release notes.)
l
Browser (Supported versions are listed in the release notes.)
Network information
The management port and login information in the Planning Worksheets of this
install guide. This information includes:
l
A static IP address for each storage processor in the system (for example,
123.45.6.7)
l
The IPv6 global prefix and gateway for each SP if your network supports the IPv6
Internet Protocol and you want to manually configure IPv6 for the management
ports
l
The subnet mask of the LAN to which the system is connected
l
The default gateway address of the LAN to which the system is connected
Prepare your system
Site requirements 11

Table of Contents

Other manuals for EMC2 VNX Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EMC2 VNX Series and is the answer not in the manual?

EMC2 VNX Series Specifications

General IconGeneral
BrandEMC2
ModelVNX Series
CategoryStorage
LanguageEnglish

Related product manuals