EMC2 VNX Series Installation Guide

3. Connect SPE SP A to SPE SPS A. See cable 2.
4. Connect SPE SP B to SPE SPS A. See cable 3.
5. Connect DAE 0 SPS A to PDU A. See cable 4.
6. Connect LCC A of DAE 0 to DAE 0 SPS A. See cable 5.
Figure 35 Power up sequence for PDU A
1
4
5
3
2
Connecting or verifying the black power cables for PDU B
Procedure
1. Use the black power cables to connect the PDU B side cables:
Refer to Figure 36 on page 50 while performing the procedure that follows.
2. Connect the SPE SPS B to PDU B. See cable 1.
3. Connect SPE SP A to SPE SPS B. See cable 2.
4. Connect SPE SP B to SPE SPS B. See cable 3.
5. Connect DAE 0 SPS B to PDU B. See cable 4.
6. Connect LCC B of DAE 0 to DAE 0 SPS B. See cable 5.
Power up
Connecting or verifying the black power cables for PDU B 49

EMC2 VNX Series Specifications

General

Brand	EMC2
Model	VNX Series
Category	Storage
Language	English