DPSI RV Mini Family Operating Instructions Version 1.0
Page 36 of 54
Battery types are defined as follows:
Type no. Buzzer Code Battery Type / Programming
1 1x beep 5 cells NiCd / NiMH
2 2x beeps 6 cells NiCd / NiMH
3 3x beeps 2 cells Lithium-Ion
4 4x beeps 2 cells Lithium-Polymer
5 5x beeps 2 cells LiFePo (e.g. A123)
6 6x beeps 7 cells NiCd / NiMH (res.)
7 7x beeps All tests deactivated
By default "battery type 4" (LiPo battery) is programmed at delivery.
Selection "7 beeps" (all tests deactivated) causes the DPSI RV Mini
not to conduct any voltage tests. No empty batteries or other errors are
indicated anymore.
Hint:
Always use two identical batteries (i.e. same battery type: NiCd, NiMH or LiPo
and same number of cells). Battery capacity may be different - although it makes
no sense.
Hint:
The battery type is output after powering the DPSI RV Mini on by means of
buzzer codes. Multiple beeps after turning the system on therefore do not
indicate an error!
To Next Page
Loading...
