7 Commands
7.1 Tools commands
The Daniel MeterLink Tools menu commands provides the following utilities for the
meter's health status, monitoring operational conditions, establishing a baseline of the
meter's flow characteristics, updating the meter's program components and monitoring
communications between Daniel MeterLink and the meter.
Command Description
Edit/Compare Configuration Open, edit, and compare configurations from files and meters.
Waveform Viewer Collect, view, save, print ultrasonic waveforms from meter or file.
Gas SOS Calculator Calculate speed of sound for a known gas composition.
Outputs Test Test frequency, current, and digital outputs by fixing them to a
set value.
Transducer Swap-Out Adjust path length parameters when changing out transducers,
stalks, holders, or mounts.
Set Baseline Wizard Establishes the baseline for the meter's flow characteristics that
can be used to monitor the heath of the meter run using Contin-
uous Flow Analysis features.
Program Download Upgrade the program components in Daniel Ultrasonic meters.
Communications Analyzer Monitor communications between Daniel MeterLink and a meter
Commands
Operations manual 109
To Next Page
Loading...
