Emerson Daniel 3415

2 Communications
2.1 Setup meter communications
After the installation of your Daniel Ultrasonic Meter, install Daniel MeterLink TM on your
PC or laptop as described in the Daniel MeterLink Software for Gas and Liquid Ultrasonic Flow
Meters Quick Start Manual (P/N 3-9000-763) for your operating system (Windows
®
2000,
Windows
®
Vista, Windows
®
7 or Windows
®
8), then configure the meter.
The installation CD is made available with the Daniel MeterLink Software for Gas and Liquid
Ultrasonic Flow Meters Quick Start Manual (P/N 3-9000-763) located inside the back cover.
The Daniel MeterLink installation program is available for download from the Daniel
Measurement and Control, Inc. website:
http://www.daniel.com/um2.htm
2.1.1 Daniel MeterLink utilities
Daniel MeterLink provides the following utilities to configure the meter's flow
measurement units, meter output parameters, communications settings, output tests and
logs and reports file management.
Field Setup Wizard
• Startup
• General
• Frequency/Digital Output Sources
• Frequency Outputs
• Meter Digital Outputs
• Current Outputs
• HART
®
Outputs
• Meter Corrections
• Temperature and Pressure
• Gas Chromatograph Setup
• AGA8
• Continuous Flow Analysis
• Local Display
Tools
• Edit/Compare Configuration
• Waveform Viewer
• SOS Calculator
Communications
Operations manual 3