Emerson Daniel 3415

WetCalFunction(x)=
selected wet-calibration function
Wet calibration
Configure the date points listed below from the Daniel MeterLink Calibration|Meter
Factors menu:
Data Points for wet calibrationTable 5-2:
Daniel MeterLink
™
Display Name Data points, options and guidelines
Flow calibration method Data points affected:
• CalMethod
d Options:
• Piece-wise (2)
• Polynomial (1)
• None
(0) Guidelines:
• This value should only be modified under direction of Daniel per-
sonnel.
Procedure
1. Choose a Flow Calibration Method:
• Polynomial
• Piece-wise linear
• None (If set to None then the wet calibration has the same value as the dry
calibration.)
2. Select the Calibration|Meter Factors menu.
Configurations
40 3410 Series Gas Ultrasonic Flow meters