Mentor MP Short Form Guide 5
Issue Number: 5 www.controltechniques.com
Declaration of Conformity
Control Techniques Ltd, The Gro, Newtown. Powys. UK. SY16 3BE
The DC variable speed drive products listed above have been designed and manufactured in
accordance with the following European harmonized standards:
The corresponding international standards are:
IEC 61800-5-1:2007
IEC 61800-3:2004
IEC 61000-6-2:2005
IEC 61000-6-4:2006
These products comply with the Low Voltage Directive 2006/95/EC and the Electromagnetic
Compatibility Directive 2004/108/EC.
These electronic drive products are intended to be used with appropriate motors,
controllers, electrical protection components and other equipment to form complete end
products or systems. Compliance with safety and EMC regulations depends upon installing
and configuring drives correctly, including using the specified input filters. The drives must
be installed only by professional assemblers who are familiar with requirements for safety
and EMC. The assembler is responsible for ensuring that the end product or system
complies with all the relevant laws in the country where it is to be used. Refer to the User
Guide. An EMC Data Sheet is also available giving detailed EMC information.
Size 1 Size 2
MP25A4(R) MP25A5(R) MP350A4(R) MP350A5(R) MP350A6(R)
MP45A4(R) MP45A5(R) MP420A4(R)
MP75A4(R) MP75A5(R) MP470A5(R) MP470A6(R)
MP105A4(R) MP105A5(R) MP550A4(R)
MP155A4(R) MP155A5(R) MP700A4(R) MP700A5(R) MP700A6(R)
MP210A4(R) MP210A5(R) MP825A4(R) MP825A5(R) MP825A6(R)
MP900A4(R)
MP1200A4(R) MP1200A5(R) MP1200A6(R)
MP1850A4(R) MP1850A5(R) MP1850A6(R)
EN 61800-5-1:2007
Adjustable speed electrical power drive systems - safety requirements -
electrical, thermal and energy
EN 61800-3:2004
Adjustable speed electrical power drive systems. EMC product standard
including specific test methods
EN 61000-6-2:2005
Electromagnetic compatibility (EMC). Generic standards. Immunity
standard for industrial environments
EN 61000-6-4:2007
Electromagnetic compatibility (EMC). Generic standards. Emission
standard for industrial environments
T. Alexander
VP Technology
Date: 23rd December 2009
To Next Page
Loading...
