Emerson Mentor MP - Page 68

68 Mentor MP Short Form Guide
www.controltechniques.com Issue Number: 5
Defines the sub block headers. Can be used by the MP-Keypad to display the same
strings as the SM-Keypad.
The OR of Pr 23.03 to Pr 23.09. To be used by the MP-Keypad.
When this parameter is set to 1 the associated pre-defined sub block is accessible.
When this parameter is 0 the associated pre-defined block is bypassed.
23.01 Sub block headers
RO Txt NC PT BU
Ú
USEr (0), SEt UP (1), diAGnoS
(2), triPS (3), SP LOOP (4),
SintEr (5), Fb SP (6), inPut (7)
Ö USEr (0)
23.02 Binary sum of pre-defined sub block enables
RO NC PT BU
Ú 0 to 127 Ö 0
Parameter Value
23.03 1
23.04 2
23.05 4
23.06 8
23.07 16
23.08 32
23.09 64
23.03 - 23.09 Pre-defined sub block enable
RW Bit US BU
Ú 0 to1 Ö 1
Parameter Description Display
23.03 Set up SEt UP
23.04 Diagnostic diAGnoS
23.05 Trips triPS
23.06 Speed loop SP LOOP
23.07 Serial interface SintEr
23.08 Speed feedback Fb SP
23.09 IO InPut