Emerson Rosemount 1195 - Available Pipe Lengths; Transmitter Connections; Transmitter Fill; Orifice Type

10-3
Available Pipe Lengths
See pipe lengths Table 10-3.
Table 10-3. Pipe Lengths.
NOTE
The above dimensions are based on standard model offering.
Transmitter Connections
2
1
/8 in. (54 mm) center-to-center. Other transmitter spacing can be
accommodated using the optional remote adaptors and
customer-supplied impulse piping. DIN 19213 connections are
available.
Transmitter Fill
Model 1195—Transmitter specific; ProPlate—silicone filled (3051CD
transmitter); Mass ProPlate—silicone filled (3095 MV Transmitter).
Orifice Type
Square edge: Orifice bore sizes 0.066 and larger.
Quadrant edge: Orifice bore sizes 0.034, 0.020, 0.014, and 0.010.
Bodies contain corner tapped pressure ports.
Weight
The following weights provided in Table 10-4 are approximate:
Table 10-2. Standard Bore Sizes
(1)
½ in. Lines (15 mm) 1 in. Lines (25 mm) 1½ Lines (40 mm)
in. mm Beta in. mm Beta in. mm Beta
0.010
0.014
0.020
0.034
0.066
0.109
0.160
0.196
0.260
0.340
0.25
0.36
0.51
0.86
1.68
2.77
4.06
4.98
6.60
8.64
0.015
0.021
0.030
0.051
0.099
0.164
0.241
0.295
0.392
0.512
0.150
0.250
0.345
0.500
0.630
0.800
3.81
6.35
8.76
12.70
16.00
20.32
0.137
0.228
0.314
0.456
0.574
0.729
0.295
0.376
0.512
0.748
1.022
1.184
7.49
9.55
13.00
19.00
25.96
30.07
0.188
0.240
0.327
0.477
0.652
0.756
(1) Special bores are available between beta limits of 0.1 and 0.8. Consult Factory.
Line Size
Flanged Total Length
(flange face to
flange face)
Beveled or Threaded Total
Length
(pipe end to pipe end)
in. mm in. mm
½ in. (15 mm)
1 in. (25 mm)
1 ½ in. (40 mm)
18.2
28.9
40.3
462
734
1023
18.0
28.6
39.9
457
726
1013