21
VIEW THE OTHER INDOOR CHANNELS (OPTIONAL FEATURE WITH ADD ON EXTRA
SENSORS)
This console is capable to pair with a wireless 7-IN-1 sensor and up to 7 wireless indoor
sensors. If you have 2 or more Indoor sensors, you can press [ CHANNEL ] key to switch
between different wireless channels in normal mode, or press and hold [ CHANNEL ] key for 2
seconds to toggle auto-cycle mode to display the connected channels at 4 seconds interval.
During auto-cycle mode, the icon will show on the indoor channel section of the console's
display. Press [ CHANNEL ] key to stop auto cycle and display the current channel.
TREND INDICATOR
The trend indicator shows the trends of changes in the
forthcoming few minutes. The icon will appear in temperature,
humidity, index and baro section.
Rising Steady Falling
WIND
WIND SPEED AND DIRECTION SECTION OVERVIEW
Past wind
directions indicator
of last 5 minutes
Wind direction
Wind speed
level indicator
Real time wind
direction indicator
Average / gust
wind speed
TO SET THE WIND SPEED UNIT AND DIRECTION DISPLAY FORMAT
1. In normal mode, press and hold [ WIND ] key for 2 seconds to enter into wind speed unit
mode and the unit will ash. Press [
] or [ ] key to change the wind speed unit in this
sequence: m/s
km/h knots mph
2. Press [ WIND ] key again to enter wind direction setting mode. The wind direction reading
will ash, and then press [
] or [ ] key to select the display format between 360 degree
or 16 direction.
3. Press [ WIND ] key again to return normal mode.
TO SELECT THE WIND DISPLAY MODE
In normal mode, press [ WIND ] key to switch between BEAUFORT scale, AVERAGE and
GUST wind speed.
BEAUFORT SCALE TABLE
The Beaufort scale is an international scale of wind velocities ranging from 0 (calm) to 12
(Hurricane force).
To Next Page
Loading...
Need help?
General
