The PSAdmin Utility for Windows-based
Specify an IP address:
IP Address: This option shows the print server’s current IP
address maybe obtained from your DHCP
server or manually specified. This option also
allows you to manually specify an IP address
to the print server, if DHCP option is disabled.
Subnet Mask: This option shows the print server’s current
subnet mask maybe obtained from the
DHCP server or manually specified. This
option also lets you manually specify a
subnet mask to the print server, if DHCP
option is disabled. This value is optional.
Gateway: This option shows the print server’s current
gateway address maybe obtained from the
DHCP server or manually specified. The option
also allows you to manually specify the IP
address of the gateway to the print server, if
DHCP option is disabled. This value is optional
Upgrade
Upgrade allows the user to upgrade the print server device.
In order to upgrade the unit please perform the steps as
follows:
1. Click Upgrade button just like a picture ＜
＞, as
shown as follow picture
3- 10
To Next Page
Loading...
Need help?
Ports & interfaces