Encore ENPS-2012 User Manual

The PSAdmin Utility for Windows-based
2. Select General Upgrade. Make sure that the upgrade
file is located in the same directory as PSAdmin. The
upgrade filename is mps17.bin.
Reset
1. Click Reset button just like a picture ＜ ＞.
2. Reset allows the user to reset the print server device in
order to establish a new connection or for new settings to
take effect.
3 - 11

Encore ENPS-2012 Specifications

Ports & interfaces

USB ports	2 x USB 2.0
Parallel port	1 Bi-direction parallel port (IEEE 1284)
Network port	RJ-45 for 10Base-T or 100Base-TX