Encore ENPS-2012 User Manual

6. Network Print Monitor
Preparation
The print server supports TCP/IP, IPX/SPX and NetBEUI
protocols under Windows 95/98/Me/NT/2000/XP/2003.
Please make sure that the following steps have been
completed before proceeding with installation under
Windows PC.
Select A Desired Protocol
TCP/IP
 The TCP/IP Protocol must be installed. For further
information, please read “TCP/IP Protocol Installation”
section in this chapter.
Note: If TCP/IP protocol is chosen, please refer to
“Assigning an IP Address to the print server”
section later in this chapter.
6 - 1

Encore ENPS-2012 Specifications

Ports & interfaces

USB ports	2 x USB 2.0
Parallel port	1 Bi-direction parallel port (IEEE 1284)
Network port	RJ-45 for 10Base-T or 100Base-TX