Troubleshooting
Power Related Problems
The print server requires an external AC power adapter in
order for it to function. If you have a power problem, check
to see whether the power cord or its connectors are
damaged. More importantly, check to see that the AC
power adapter included with the print server matches the
AC voltage in your country or area. Using an incorrect AC
adapter will damage your print server.
Print Port Related Problems
Printing data failure may be caused by a loose connection
of the print server to the Centronics parallel port of the
printer. Check to see if any of the pins on the 36-pin
connector are damaged. In addition, check the cable
connection. If the pins are damaged, contact your dealer
for a replacement connector.
Windows 95/98/Me/NT/2000/XP/2003
Troubleshooting
Multi-Segment LAN Environment Installation
(through the Network Print Port)
If your print server and Windows
95/98/Me/NT/2000/XP/2003 are located on two different
segments, and your Windows NT server is used as the
router/gateway you will need to implement the following
9 - 3
To Next Page
Loading...
Need help?
Ports & interfaces