Configuration from Embedded Web Server
5. Configuration from
Embedded Web Server
Overview
The Print Server contains an embedded web server that
can be accessed through a supported web browser on a
LAN, for example, IE 4.0, Netscape 4.0 or above is
recommended.
The embedded web server provides access to
configuration and management pages for the print server
and the connected peripheral device.
Using Embedded Web Server
Before you can use the embedded web server, the print
server must be configured with an IP address. There are
many ways to configure the print server’s IP address. For
example, the Windows-based of PSAdmin utility can easily
set an IP address with the print server, please see the
Properties – TCP/IP options of chapter 3.
After an IP address is established on the print server,
perform the following step:
5 - 1
To Next Page
Loading...
Need help?
Ports & interfaces