TCP/IP LPR Port Printing Installation
2. Manually specify (using DOS commands or
UNIX text-mode commands. This applies to
Windows NT/2000/XP/2003 and UNIX
systems).
Note: The Network Print Monitor can only search for the
print server(s) over the same network segment the
Windows NT/2000/XP/2003 computer is located.
You would like to install a print server on a different
network segment.
DHCP
The print server supports DHCP feature, allowing the print
server to obtain an IP address and related TCP/IP settings
automatically from a DHCP server. While the print server
supports DHCP, we strongly recommend you manually
specify a fixed IP address to the print server. By default,
the print server’s DHCP function is disabled.
Windows NT LPR Port Printing
Installation
1. Click Start, point to Settings, and select Printer.
2. Run Add Printer.
3. The Add Printer Wizard screen will appear, Select My
Computer and click Next.
7 - 2
To Next Page
Loading...
Need help?
Ports & interfaces