Configuration from Embedded Web Server
Bindery Mode: To Enable Bindery Mode, if you want to
setup Bindery environment. To select File
Server Name of NetWare.
Installing Print Server on NetWare
4.x/5.x
Due to its architecture and functionality, the print server
must work under NetWare 4.x/5.x NDS Bindery Emulation.
When you install the NetWare file server for the first time,
by default, the installation program will automatically set up
the Bindery Emulation function for you by adding “SET
BINDERY CONTEXT =” in the AUTOEXEC.NCF file. By
default, the bindery context will only be set on your
organization (O) object.
If you have ever modified this line, or if you have ever
added any organization units (OU) to your NDS tree after
the NetWare system was installed, please read the
following section before you install the print server.
For the purpose of illustration, we assume the NDS tress
structure is as follows:
[ROOT]
(O)ABC
(OU)ABC-USA (OU)Sales
5 - 16
To Next Page
Loading...
Need help?
Ports & interfaces